- Pakkingmateriaal.be ›
- Produkter ›
- Tätningsmassor ›
- Flytande packning › 94050105
Elring DIRKO HT. oxim (300 C) liquid gasket kit, Black, silicone compound, profipress 200 ml
Pris och tillgänglighet
SKU: 94050105Tillgänglighet: Ersatt av ny modell
Denna produkt har ersatts av:Elring DIRKO HT. oxim (315 C) liquid gasket kit, Black, silicone compound, profipress 200 ml
- Säker anslutning
- Snabb leverans
- Fri leverans från €99,95
- Personlig service
- Nöjda kunder
Beskrivning
Denna produkt har ersatts av: Elring DIRKO HT. oxim (315 C) liquid gasket kit, Black, silicone compound, profipress 200 ml.
Elring Dirko S HT oxim profipress (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 200 ml profipress Compressed gas cartridge.
Elring Dirko S HT oxim profipress (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 200 ml profipress Compressed gas cartridge.
Specifikationer
Colour | Black |
Oil resistant | Yes |
Max temp (°C) | +315 °C (24u) |
Max temp (°C) cont. | -60 tot +285 |
Chemical basis | Oxime silicone |
Components | Single component |
Max sealing gap | 2,0 mm |
Hardness | 40 ± 5 |
Density (g/ml) | 1,18 ± 0,2 |
volume | 200 ml |
Curing | Room temperature vulcanised (RTV) |
Consistency | Pasty, stable, permanently resilient when cured |
pH value | Neutral |
Electrical conductivity | Isolerend |
Elastic modulus 100\% | 1.0 ± 0.2 N/mm2 |
Tensile strength | 3,3 ± 0,2 N / mm² |
Elongation at break | 400 ± 100 \% |
Ytterligare produktinformation
Vi skickar din beställning med PostNL. Följande gäller: beställt måndag till fredag före klockan 17 skickas samma dag. Vi erbjuder olika fraktalternativ. Du kan välja ett av alternativen under kassan.
Visa fraktkostnaderna förr
Frakt till Belgien (BE)
Frakt metod | Beställningsbelopp under €99,95 | Beställningsbelopp över €99,95 |
Brevlådespaketet | €5,95 | Inga leveranskostnder! |
Paket med Track & Trace | €7,95 | €2,00 |
Paket med Track & Trace, endast angiven adress | €8,95 | €3,00 |
Leverans till en PostNL-paketpunkt | €7,95 | €2,00 |
Det finns för tillfället inga recensioner.
Bli den första att recensera den här produkten