- Pakkingmateriaal.be ›
- Produkter ›
- Tætningsmasser ›
- Flydende pakning › 94050105
Elring DIRKO HT. oxim (300 C) liquid gasket kit, Black, silicone compound, profipress 200 ml
Pris og tilgængelighed
SKU: 94050105Tilgængelighed: Erstattes af en ny model
Dette produkt er blevet erstattet af:Elring DIRKO HT. oxim (315 C) liquid gasket kit, Black, silicone compound, profipress 200 ml
- Sikker forbindelse
- Hurtig levering
- Gratis levering fra 745,55 kr
- Personlig service
- Tilfredse kunder
Beskrivelse
Dette produkt er blevet erstattet af: Elring DIRKO HT. oxim (315 C) liquid gasket kit, Black, silicone compound, profipress 200 ml.
Elring Dirko S HT oxim profipress (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 200 ml profipress Compressed gas cartridge.
Elring Dirko S HT oxim profipress (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 200 ml profipress Compressed gas cartridge.
Specifikationer
Colour | Black |
Oil resistant | Yes |
Max temp (°C) | +315 °C (24u) |
Max temp (°C) cont. | -60 tot +285 |
Chemical basis | Oxime silicone |
Components | Single component |
Max sealing gap | 2,0 mm |
Hardness | 40 ± 5 |
Density (g/ml) | 1,18 ± 0,2 |
volume | 200 ml |
Curing | Room temperature vulcanised (RTV) |
Consistency | Pasty, stable, permanently resilient when cured |
pH value | Neutral |
Electrical conductivity | Isolerend |
Elastic modulus 100\% | 1.0 ± 0.2 N/mm2 |
Tensile strength | 3,3 ± 0,2 N / mm² |
Elongation at break | 400 ± 100 \% |
Yderligere produktinformation
Vi sender din ordre med PostNL. Følgende gælder: bestilt mandag til fredag inden kl. 17 afsendes samme dag. Vi tilbyder forskellige forsendelsesmuligheder. Du kan vælge en af mulighederne under kassen.
Se forsendelsesomkostningerne for
Forsendelse til Belgien (BE)
Fragtmetode | Ordrebeløb under 745,55 kr | Ordrebeløb over 745,55 kr |
Postkassepakke ikke sporet | 44,41 kr | Ingen forsendelsesomkostninger! |
Pakke med Track & Trace | 59,30 kr | 14,89 kr |
Pakke med Track & Trace, kun angivet adresse | 66,79 kr | 22,38 kr |
Levering til et PostNL-pakkepunkt | 59,30 kr | 14,89 kr |
There are currently no product reviews.
Vær den første til at bedømme dette produkt